Medical Gas Central Stations

Medical Gas Central Stations

The automatic change over decompression unit is designed to supply medical gas (oxygen-nitrous oxide-air-nitrogen-carbon dioxide) of any type of medical gas network, where continuity of supply is essential and where the pipeline is supplied from manifold high pressure gas cylinders.

Medical compressed gas. and vacuum outlets are suit., for external or intemal wall mounting, for bed head unit ant ceiling pendant installation.
This product complies with all current safety regulations and laws and is designed and tested to guarantee safety operations.

Main decompression unit

Automatic Change over Decompression Unit for Oxygen, Nitrous Oxide, Air, Nitrogen, Carbon Dioxide. The units are composed of:
  • Single and double stage decompression manifold systems with automatic change-over and integrated monitoring alarm system (40 and 90 Nm3/h)
  • Emergency manifold stations (40 and 90 Nm3/h)
  • Emergency inlet points for medical gas pipeline management in of emergency or maintenance
  • HTM 02-01 automatic manifolds and emergency reserve manifolds (650 and 1000 l/min)
  • Cylinder manifolds with non-return valves
  • Cylinder wall racks
  • High pressure copper tail pipes
  • High pressure line valves and fittings

The automatic change-over decompression units are composed of:

  • A wall mounted box made of 1.5mm painted steel with door key-operated lock and window for reading pressures gauges.
  • Two pressure regulators (OT 58) connected in parallel and linked respectively to the right and to the left manifold of cylinders. Each regulator is fitted with brass safety valve set at 13bar, with one pressure gauge diameter Ø63mm for high pressure (315bar full range) and with outlet pressure adjustment screw.
  • Two inlet filter with pressed brass body and bronze filter mesh.
  • Two inlet high pressure valves.
  • Two outlet low pressure valves.
  • One automatic change over device (inverter) which is connected to the outlet of the regulators.
  • One pressure gauge to indicates the network pressure.
  • Two pressure transmitters for monitoring the pressure in the cylinders.